Electromechanical boom barrier in lengths from 3–7 meters. Two booms can be combined in a master–slave arrangement for use at extra wide entrances.
The boom has a robust structure made of steel, with balancing springs designed to last for up to a million opening and closing operations. The boom is wind resistant.
The boom control system has sophisticated electronics for obstacle detection. The control system is also equipped with a diagnostic system – in case of failure, the relevant error will be shown on a display.
Optional battery backup allows for continued operation during power failure. The batteries may also be connected to a solar panel in cases where there is no regular power supply.
The boom can be mechanically released with a key.
Boom barrier is supplied with housing in stainless steel.
Boom barrier is supplied with housing in powder coated steel sheet.
| Dimensions | 1215 x 400 x 299 mm |
| Weight | 80 kg (3–5 m) / 85 kg (7 m) |
| Working temperature | -20°C – 50°C |
| Power supply | 230 V AC, 50/60 Hz |
| Motor voltage | 24 V DC |
| Power consumption | 1.3 A (3 m) / 1.1 A (5–7 m) |
| Effect | 150 W (3 m) / 110 W (5–7 m) |
| Torque (Nm): | 100 (3 m) / 200 (5 m) / 300 (7 m) |
| Speed: | 3 m: 1.5–4 s 5 m: 3–6 s 7 m: 6–10 s |
| Cycles/hour | 500 (3 m) / 350 (5 m) / 200 (7 m) |
| Protection level (IP) | 44 |
|
Product sheet:
